Dual interface smart card reader: Contact and Contactless

The AP-SCRN001-00's high integration ensures a cost-effective bill of materials (BOM) for smart card readers, offering a competitive advantage in the market. It complies with a number of international standards, including ISO 7816 for IC cards, PC/SC 2.0 for Windows smart cards, Microsoft WHQL, EMV for Europay, Mastercard, and Visa, and USB-IF CCID.

The AP-SCRN001-00 is suitable for use with a wide range of smart card read/write terminals, including self-order kiosks, point-of-sale terminals, public telephones, e-commerce platforms, online transactions, personal certification, prepaid systems, loyalty programs, and other similar applications.

Product Features

• USB Full-Speed interface, compliant with USB 2.0 Specification Support single slot
• EMVCo 4.0 Level 1 Specification certified
• PBOC2.0 Level 1 Specification certified
• Support PC Smart Card industry standard-PC/SC 2.0
• Support ISO7816 T0, T1 protocol
• Support ISO7816 Class A, B, C (5/3/1.8V) cards
• Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card via external EEPROM
• Support customized USB VID/PID, manufacture/product strings and serial number by external EEPROM via USB interface
• Compatible with Microsoft USB-CCID driver

Specification

Smart Card Reader

1.Supports USB 2.0 full speed, USB‐IF certified

2.EMV 4.0 Level 1 specification certified

3.PBOC2.0 Level 1 certified

4.Support PC Smart Card industry standard - PC/SC 2.0

5.Support T0, T1 protocol

6.Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card via external EEPROM

7.Support ISO7816 Class A, B and C (5V/3V/1.8V) card

8.Support short APDU and extended APDU

9.Compatible with Microsoft USB‐CCID driver

10.Support remote wake up through inserting card/removing card

11.Support card power over current protection mechanism

12.Support Microsoft Smart Card for Windows

13.Meet Microsoft WHQL USB Smart Card Reader requirements

14.Meet US Federal Information Processing Standards (FIPS) Publication 201 requirements on smart card reader interoperability

15.Insertion cycles 100,000

16.8 Pin Handling C4 / C8 supported

Contactless NFC Card Reader

1.80C51 microcontroller core with 45056 bytes ROM and 1224 bytes RAM

2.Highly integrated demodulator and decoder

3.Buffered output drivers to connect an antenna with minimum number of external components

4.Integrated RF level detector

5.Integrated data mode detector

6.Supports ISO/IEC 14443A Reader / Writer mode up to 848 kbit/s

7.Supports ISO/IEC 14443B Reader / Writer mode up to 848 kbit/s

8.Supports MIFARE encryption in Reader / Writer mode and higher transfer speed communication at 212 kbit/s, 424 kbit/s and 848kbit/s

9.Supports contactless communication according to the FeliCa protocol at 212 kbit/s and 424 kbit/s

10.Typical operating distance in Reader / Writer mode for communication to ISO/IEC 14443A/MIFARE, ISO/IEC 14443B or FeliCa cards up to 6 mm depending on card

11.Support NFCIP‐1 mode up to 424 kbit/s

12.Typical operating distance in NFCIP‐1 mode up to 50 mm depending on antenna size, tuning and power supply

13.Supported USB 2.0 full speed interface

14.Windows PC/SC driver (WHQL certified)

Host Interface

1.2‐port Hub Compliant to USB Specification Revision 2.0

2.Connector / Cable 5‐pin Lockable Connector

3.Operation Systems Windows / Linux / Android

4.Driver Windows / Linux / Android

5.Status LED LED DL1 card detect / DL2 Power

Note

Not sure what your need? We'll create solution for you.

Send your request to: info@jarltech.com.tw
We will promptly contact you and inform you on your project. You can also reach us by phone.